The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is often a highly effective solar controller created for off-grid photo voltaic devices. According to multiphase synchronous rectification know-how, it makes sure optimized Electrical power conversion and system stability for an array of photovoltaic (PV) programs.
Crucial Attributes on the EPEVER Tracer AN Series Controller
The Tracer AN series makes use of EPEVER Solar Demand Controller technologies for outstanding solar energy harvesting. Vital features include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Highly developed MPPT Algorithm with >99% effectiveness.
Twin-Phase Charging for enhanced battery lifestyle.
Liquid crystal display Screen with genuine-time info checking.
Several Load Management Modes which include handbook and timer.
Detailed Digital Protections in opposition to overcharging, in excess of-discharging, quick circuits, and reverse polarity.
Action-by-Move Guideline to Setting Up the EPEVER Tracer AN Sequence Controller
1. Unboxing and Making ready the Controller
Make sure all factors are integrated: Tracer AN device, temperature sensor, conversation cables, and consumer handbook.
Verify the design selection and voltage ratings match your solar panel and battery specifications.
two. Mounting the Cost Controller
Decide on a properly-ventilated, dry area close to the battery bank.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Manage right clearance for warmth dissipation.
3. Wiring the Solar Demand Controller
Warning: Normally observe right security protocols and make sure the method is driven off ahead of connecting components.
Move one: Link the battery terminals towards the charge controller (constructive to positive, detrimental to adverse).
Step two: Hook up the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery initial.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild control.
five. Monitoring and Data Logging
The Tracer AN Collection supports actual-time monitoring utilizing the MT50 remote meter.
Data is often logged through the RS485 communication port working with computer software such as Photo voltaic Station Personal computer.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Common Difficulties
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue two: Over-Voltage Defense
Verify the solar array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Advantages of the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technologies makes certain:
Greater Effectiveness: Reduced Strength losses during conversion.
Improved Trustworthiness: Stable functionality under variable masses.
For a longer period Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation can be an Extraordinary option for optimizing solar power era and increasing battery lifestyle. By pursuing the above mentioned setup information, buyers can make sure greatest performance Read more and method longevity.