The EPEVER Tracer AN Series Solar Cost Controller is a hugely economical photo voltaic controller designed for off-grid solar methods. Based upon multiphase synchronous rectification technologies, it guarantees optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Important Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for remarkable photo voltaic Electrical power harvesting. Vital features include:
Multiphase Synchronous Rectification (MSR) for improved energy conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Stage Charging for Improved battery lifetime.
Liquid crystal display Exhibit with true-time facts checking.
A number of Load Management Modes like guide and timer.
Extensive Electronic Protections towards overcharging, more than-discharging, short circuits, and reverse polarity.
Step-by-Move Guideline to Starting the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Be certain all parts are provided: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry locale near the battery financial institution.
Safe the Tracer AN controller using the provided mounting brackets.
Manage right clearance for heat dissipation.
3. Wiring Read more the Photo voltaic Demand Controller
Caution: Usually follow good protection protocols and make sure the program is powered off right before connecting parts.
Phase 1: Join the battery terminals on the cost controller (positive to favourable, detrimental to adverse).
Stage two: Hook up the solar panel array to the PV enter terminals.
Stage 3: Hook up the load terminals if utilizing a immediate load link.
Stage four: Double-Test all connections for polarity and tightness.
four. Configuring the Controller Options
Electrical power around the controller by connecting the battery to start with.
Make use of the LCD Exhibit to navigate the options menu.
Configure:
Battery Type: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Checking and Info Logging
The Tracer AN Series supports authentic-time monitoring utilizing the MT50 remote meter.
Details might be logged by way of the RS485 interaction port making use of software program including Solar Station Laptop.
Remote checking is feasible While using the EPEVER WiFi module.
6. Troubleshooting Frequent Problems
Difficulty 1: No Ability Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Situation two: In excess of-Voltage Defense
Verify the photo voltaic array’s voltage rating.
Change process parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options during the menu.
Advantages of the Tracer AN Collection with MSR Engineering
The multiphase synchronous rectification technology assures:
Bigger Performance: Decreased Electricity losses in the course of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Daily life: Consistent and correct charging profiles.
Summary
The EPEVER Solar Charge Controller with multiphase synchronous rectification know-how is definitely an Extraordinary option for optimizing solar power generation and increasing battery lifestyle. By pursuing the above setup tutorial, users can guarantee utmost efficiency and program longevity.